TECTONIC 3D

Live / Registered — Registered (as of 13 May 2025)

What this means for you

Registered since 13 May 2025. The owner can stop confusingly similar uses in the classes it covers.

Record

Serial number
98466619
Registration number
7790581
Mark type
Design + words
Filed
25 Mar 2024
Published for opposition
25 Mar 2025
Registered
13 May 2025
Attorney of record
E. Anthony Figg

Goods and services

  • Class 001 — Chemicals: Chemicals for industrial use; Unprocessed resins, namely, Polypropylene, PLA (polylactic acid), ABS (acrylonitrile butadienestyrene), PETG (polyethylene terephthalate glycol), PA11 (polyamide11), PC/ABS (polycarbonate/acrylonitrile butadiene styrene), PPO (polyphenylene oxide), TPC (thermoplastic copolyester), PEEK (polyether ether ketone), PEKK (polyetherketoneketone), PI (polyamide), all for use in Additive manufacturing, namely, 3D printing; industrial chemicals and industrial Chemicals in Granule and Powder form, all for use in additive manufacturing, namely, 3D printing; the above goods not for sheets of plastic for optical use, in particular or use in spectacle frames and lenses
  • Class 017 — Rubber goods: Plastic filaments for 3D printing; Semi-processed PLA (polylactic acid) filaments, for use in 3D printing; Semi-processed ABS (acrylonitrile butadiene styrene) filaments, for use in 3D printing; Semi-worked thermoplastic filaments for use in 3D printing; Semi-processed thermoplastic filaments, granules, powder and pellets for use in 3D printing; plastic filaments or pellets for use in 3D printing; Semi-processed Polymer composite materials in the form of extruded pellets, rods, powders, strands and filaments for use in 3D printing; Semi-finished polymers, namely, Pellets for use in 3D printing; Thermoplastic filaments used for 3D printing; Semi-processed PETG (polyethylene terephthalate glycol) filaments for use in 3D printing; Semi-processed Thermoplastic polyester filaments, for use in 3D printing; Semi-processed Thermoplastic polymers for use in 3D printing; plastic PA11 (polyamide11) filaments for use in 3D printing; Semi- processed PC/ABS filaments (polycarbonate/acrylonitrile butadiene styrene) for use in 3D printing; Semi-processed PPO (polyphenylene oxide) filaments for use 3D printing; Semi-processed PC filaments (polycarbonate) for use 3D printing; Semi-processed TPC (thermoplastic copolyester) filaments for use in 3D printing; strength reinforced, heat resistant and moisture absorbing resistant plastic filaments for use in 3D printing; Semi-processed PEEK (polyetherether ketone) filaments for use in 3D printing; Semi-processed PEKK (polyetherketoneketone) filaments for use in 3D printing; Semi-processed PI filaments (polyamide), for use in 3D printing; Semi-processed thermoplastic powders for use in 3D printing; Semi-processed plastic Powders containing polyamide for use in 3D printing; Semi-processed Powders containing PEKK/PEEK for use in 3D printing; Semi-processed Plastic powders for use in 3D printing; Polypropylene filaments for use in additive manufacturing, namely, 3D printing; semi-processd Polypropylene filaments reinforced with carbon fibres, for use in Additive manufacturing, namely, 3D printing; semi-worked PLA (polylactic acid), semi-worked ABS (acrylonitrile butadienestyrene), semi-worked PETG (polyethylene terephthalate glycol), semi-worked nylon PA11 (polyamide11), semi- worked blend of PC-ABS (polycarbonate/acrylonitrile butadiene styrene), semi-worked PPO (polyphenylene oxide) resins, semi-worked TPC (thermoplastic copolyester) filaments, semi- processed PEEK (polyether ether ketone) filaments, PEKK (polyetherketoneketone) filaments, PI (polyamide) filaments, all for use in Additive manufacturing, namely, 3D printing; the above goods not for sheets of plastic for optical use, in particular or use in spectacle frames and lenses
  • Class 042 — Scientific and technological services: Design services, Engineering services, research and technological development services in the field of Additive manufacturing, namely, 3D printing technology and products; Material testing in the field of Additive manufacturing, namely, 3D printing; Research and development of new products for others in the field of plastics and use of plastic waste for the manufacture of additives; Development of products in the field ofadditive manufacturing, namely 3D printing; Quality control for others in the field of Additive manufacturing, namely, 3D printing; Electronic data storage, for use in the field of Additive manufacturing, namely, 3D printing

Owner

Prosecution history

  • 13 May 2025 — NOTICE OF REGISTRATION CONFIRMATION EMAILED
  • 13 May 2025 — REGISTERED-PRINCIPAL REGISTER
  • 25 Mar 2025 — OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED
  • 25 Mar 2025 — PUBLISHED FOR OPPOSITION
  • 19 Mar 2025 — NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED
  • 30 Jan 2025 — ON HOLD - ELECTRONIC RECORD REVIEW REQUIRED
  • 24 Jan 2025 — APPROVED FOR PUB - PRINCIPAL REGISTER
  • 24 Jan 2025 — EXAMINER'S AMENDMENT ENTERED
  • 24 Jan 2025 — NOTIFICATION OF EXAMINERS AMENDMENT E-MAILED
  • 24 Jan 2025 — EXAMINERS AMENDMENT E-MAILED
  • 24 Jan 2025 — EXAMINERS AMENDMENT -WRITTEN
  • 06 Dec 2024 — NOTIFICATION OF NON-FINAL ACTION E-MAILED
  • 06 Dec 2024 — NON-FINAL ACTION E-MAILED
  • 06 Dec 2024 — NON-FINAL ACTION WRITTEN
  • 31 Oct 2024 — TEAS/EMAIL CORRESPONDENCE ENTERED

View this trademark record on Marksy