MOOG

Live / Registered — Registered and renewed (as of 22 Aug 2024)

What this means for you

Registered since 13 May 2014. The owner can stop confusingly similar uses in the classes it covers; it stays on the register as long as the owner keeps up the maintenance filings (next due by 13 May 2024).

Record

Serial number
85878553
Registration number
4528066
Mark type
Stylized text
Filed
18 Mar 2013
Published for opposition
25 Feb 2014
Registered
13 May 2014
Next maintenance due
13 May 2024
Attorney of record
Ken M. Sheets

Goods and services

  • Class 008 — Hand tools: [ Hand-operated vehicle steering repair tools, namely, rack and pinion inner tie rod hand tool, rack and pinion inner tie rod crimp hand tool, hand-operated inner tie rod pin remover, tie rod sleeve hand tool consisting of specially shaped metal bracket with rod for toe adjustment on vehicles using conventional steering, hand tools, namely, square sockets, ] hand tools, namely, bushing drivers, [ hand tools, namely, ball joint press, upper arm support hand tool consisting of a steel bar with notched ends for supporting the upper arm during service on the upper spring, hand tool, namely, C clamp press, hand tool, namely, taper breaker, hand tools, namely, 4x4 sleeves, hand tools, namely, light truck long stud adapters, ] hand tool, namely, modified hole saw [, impact extension hand tool to aid in the removal of torque head bolts used to hold the rear hub to the axle, hand tool, namely, vacuum bleeder adapter, hand tools, namely, combination strut spanner nut socket and chassis height measuring hand tool ] ; hand-operated vehicle suspension repair tools, namely, camber adjusting hand tool [, upper control arm punch hand tool, self-locking nut taper hand tool, hand tool, namely, tape breaker, hand tool, namely, spanner socket, vice holding hand tool consisting of metal clamping device with threaded adjuster rod and handle for supporting struts and rack and pinion gears while performing repairs, inner tie rod bushing installation and removal hand tool, idler arm installation hand tool; vehicle constant velocity boot hand tools, namely, universal clamp hand tool, bridge clamp pliers, clamp ring hand tool, HD bridge clamp pliers, hand tools, namely, retaining ring expander, low profile clamp pliers, differential gear installation and removal hand tool, hub installer hand tool, CV joint service hand tool, hand tools, namely, joint driver set consisting of two special drivers for the removal of outer joint, 30mm socket, 36mm socket, protective vice jaws and CV boot convolute retaining hand tool; universal joint installation hand tool; universal joint removal and installation hand tool for light-duty vehicle applications; universal joint installation and removal hand tool for heavy-duty vehicle applications ]
  • Class 012 — Vehicles: Vehicle structural wheel suspension and steering components, namely, adjusting sleeves, center links, drag links, drag links and track bars, alignment bushings, alignment shims, camber cams and camber kits consisting of bolts, bushings, nuts, sleeves and offset sleeves, heavy duty truck caster wedges, alignment shims and spacers, rear alignment shims, ball joints, bumper bellows; vehicle coil spring parts and accessories, namely, coil spring seats and coil spring spacers, coil spring insulators, [ coil spring stabilizers, composite springs, ] constant rate coil springs; vehicle suspension and steering components, namely, control arm bushings; vehicle suspension and steering components, namely, control arm shaft kits consisting of control arm shaft, control arm bushings, washers, shims and nuts; alignment adjusting kits for vehicles consisting of bushings, wedges, nuts, bolts, washers, sleeves, bearings, brace, caps, seals, shims, cotter pins, brackets and spacers; vehicle suspension and steering components, namely, control arm with ball joints; vehicle suspension and steering components, namely, control arm without ball joints; vehicle suspension and steering components, namely, idler arms and pitman arms; vehicle suspension and steering components, namely, king pin sets consisting of king pins, bushings, shims, nuts, bolts, grease fittings, [ seals and bearings; ] vehicle suspension and steering components, namely, king bolts; vehicle suspension and steering components, namely, king bolt bushings; vehicle suspension and steering components, namely, king bolt shims; [ rack and pinion steering gears for vehicles; ] rack and pinion bellows kits for vehicles consisting of bellows and metal or plastic clamps; vehicle suspension and steering components, namely, radius arm frame brackets; vehicle suspension and steering components, namely, rubber bushings; vehicle suspension and steering components, namely, rubber shackle kits comprised of shackles, bushings, and attaching hardware; shock absorbers for vehicles; vehicle suspension and steering components, namely, spring bolt bushings; vehicle suspension and steering components, namely, spring bolts; [ vehicle steering components, namely, steering couplers; ] vehicle steering components, namely, steering stabilizers; vehicle parts, namely, suspension struts; vehicle parts, namely, suspension sway bar links; structural parts for steering and suspension systems for vehicles, namely, tie rod ends comprised of inner tie rods, shackles, upper and lower control arm bumpers, upper strut mounts and bearings, spring seats, drag links/center links/track bars, inner socket assemblies consisting of an inner tie rod end, jam nuts, roll pins, bushings, and radial arm brackets; [ structural parts for vehicles, namely, complete strut assemblies; ]vehicle wheel hub assemblies

Owner

Prior registrations

Prosecution history

  • 22 Aug 2024 — NOTICE OF ACCEPTANCE OF SEC. 8 & 9 - E-MAILED
  • 22 Aug 2024 — REGISTERED AND RENEWED (FIRST RENEWAL - 10 YRS)
  • 22 Aug 2024 — REGISTERED - SEC. 8 (10-YR) ACCEPTED/SEC. 9 GRANTED
  • 19 Aug 2024 — CASE ASSIGNED TO POST REGISTRATION PARALEGAL
  • 04 Jun 2024 — TEAS SECTION 8 & 9 RECEIVED
  • 16 May 2024 — ASSIGNMENT OF OWNERSHIP NOT UPDATED AUTOMATICALLY
  • 13 May 2023 — COURTESY REMINDER - SEC. 8 (10-YR)/SEC. 9 E-MAILED
  • 26 Apr 2023 — ASSIGNMENT OF OWNERSHIP NOT UPDATED AUTOMATICALLY
  • 11 Jan 2023 — ASSIGNMENT OF OWNERSHIP NOT UPDATED AUTOMATICALLY
  • 31 Mar 2021 — ASSIGNMENT OF OWNERSHIP NOT UPDATED AUTOMATICALLY
  • 20 Feb 2021 — NOTICE OF ACCEPTANCE OF SEC. 8 & 15 - E-MAILED
  • 20 Feb 2021 — REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.
  • 20 Feb 2021 — CASE ASSIGNED TO POST REGISTRATION PARALEGAL
  • 11 Feb 2021 — APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED
  • 11 Feb 2021 — TEAS CHANGE OF CORRESPONDENCE RECEIVED

View this trademark record on Marksy