3P
Live / Registered — Registered (as of 09 Jan 2024)
What this means for you
Registered since 09 Jan 2024. The owner can stop confusingly similar uses in the classes it covers.
Record
- Serial number
- 79245168
- Registration number
- 7265158
- Mark type
- Word mark
- Filed
- 27 Sept 2018
- Published for opposition
- 25 Jul 2023
- Registered
- 09 Jan 2024
- Attorney of record
- Jonathan A. Winter
Goods and services
- Class 001 — Chemicals: Unprocessed plastics, unprocessed artificial and synthetic resins, adhesives for industrial purposes, composite materials with polymer matrix for industrial purposes
- Class 004 — Lubricants and fuels: Industrial oil and grease, industrial lubricants
- Class 006 — Metal goods: Metal tubes and pipes; metal tubes and pipes covered or sheathed with plastic, especially polytetrafluoroethylene (PTFE), fluoride ethylenepropylene (FEP), polyfluoroalkoxy (PFA), polyvinylidene fluoride (PVDF), polychlorotrifluoroethylene (PCTFE), ethylene tetrafluoroethylene (ETFE), polyether ether ketone (PEEK) or polymide (PI); bent pipes of metal, junctions of metal uncoated or coated with plastic for pipelines; metal moulds for forming pipes and tubes by injection and compression molding; metal moulds for forming plastic products by injection and compression molding; tubes or part of metal lined, stuffed, sealed with one or more plastic components; guide rails of metal; metal guard rails recovered with plastic liner, all of the foregoing excluding metal table supports and metal architectural hardware
- Class 007 — Machines and machine tools: Machine parts, namely, molds of plastic or metal for molding plastic parts; valves being parts of machines; Machine parts, namely molded or injected plastic pipes being parts of machines; Machine parts, namely, bearings; Parts for electrical and non-electrical pumps, namely, molded pump membranes; valves for pumps; suction pads for vacuum pumps; pistons for vehicle engines; Parts of machines, namely, valves; pins and connectors for aircraft, adhesive and protection films for aircraft, protection liners in the nature of adhesive or bonding films or sheets for aircraft, non-metallic bearings for aircraft, seals for aircraft, backup rings namely for pistons and brakes for aircraft, hydraulic and fuel conduits or hoses for aircraft, venting pastilles and membranes for aircraft, fluid loops for aircraft; Nuts for aircraft, washer for aircraft, locking plate for aircraft; cable filers for aircraft, conduits and harness protection for aircraft, harness fasteners for aircraft
- Class 009 — Scientific and electric apparatus: Test tubes; acoustic membranes; capillary tubes for laboratory use; laboratory cupels; laboratory pipettes; laboratory trays; bioreactors for cell culturing for scientific research; stills for laboratory experiments; incubators for laboratory use; laboratory chemical reactors; insulating vessels for laboratory use; reusable dispenser syringes for laboratory use
- Class 010 — Medical apparatus: Surgical apparatus and instruments; supports for surgical instruments; catheters; injectors for medical purposes; tubes used for fluid transfer for medical machines; products made of plastics for medical use, namely permeable plastic films for medical use and porous plastic for filtration for medical use; connectors made of fluoride ethylenepropylene (FEP) for medical pouches
- Class 011 — Environmental control apparatus: Parts and components of plastic, especially molded, extruded or injected, for electrical household apparatus and for installations for lighting, heating, steam generation, cooking, refrigeration, drying, ventilation, water supply and sanitary installations, namely, bearings, wheels for cooking and refrigeration apparatus, seals for household appliances, fluid and steam handling tubes for cooking and washing apparatus, insulator and/or seals for tubular heaters, thread seals tapes for water and sanitary installation, end-seals, namely, for tubular heating elements; plumbing fittings, namely, valves and fittings for taps made of plastic or coated with plastic for industrial purposes, namely, liquid gas and paste valves or valve seats made of plastic or coated with plastic for industrial purposes
- Class 012 — Vehicles: Plastic undercarriages for aircraft, obturators for aircraft
- Class 017 — Rubber goods: Sheets, plates, rods, sticks, tapes, strips, cane, tubes, flexible hoses, unlined pipes, couplings, flanges, blocks, membranes, discs, seals, sheathes, especially for cables, all being finished or semi-finished products, extruded, molded or injected in plastic, and for use in further manufacture, especially polytetrafluoroethylene (PTFE), fluoride ethylenepropylene (FEP), polyfluoroalkoxy (PFA), polyvinylidene fluoride (PVDF), polychlorotrifluoroethylene (PCTFE), ethylene tetrafluoroethylene (ETFE), polyether ether ketone (PEEK) or polymide (PI); braids and fittings of polytetrafluoroethylene (PTFE), fluoride ethylenepropylene (FEP), polyfluoroalkoxy (PFA), polyvinylidene fluoride (PVDF) or polyether ether ketone (PEEK); packing, stopping and insulating materials in the nature of sheets intended for placing inside tanks, containers or vats; insulating and anti-corrosion sheets of plastic; waterproof stuffing for sealing pipes; waterproof stuffing for tank lining; waterproof stuffing for plumbing, namely, tape for plumbing use; anti-corrosion insulation in the nature of sheets, tapes, tubes, layer encasement, expansion joints; Thread sealing tape; insulating tapes; heat shrink plastic tubing for covering electrical wire or electrical components; heat shrink tubing for measuring apparatus submerged in corrosive liquids; fluoropolymer sealing joints, namely, gaskets, seals, expansion joints; plastic hoses for plumbing use, all of the foregoing excluding architectural sheets, plates, and/or panels made of glass or plastics, used as walls, flooring, ceilings, work surfaces, furniture, fixtures, and other decorative elements
- Class 019 — Non-metallic building materials: Rigid pipes , not of metal, for building; non-metallic rigid pipes for building; guide rails not of metal
- Class 024 — Fabrics: Non-woven textile fabrics; woven plastic fabrics; non-woven plastic fabrics; fiberglass fabrics for textile use; mineral fiber fabrics for textile use
- Class 040 — Treatment of materials: Treatment of plastic materials, namely, custom treatment by molding, injection, extrusion, blow-molding, foaming, calendaring, bonding, labeling or rotary molding; purification of water and air; assembling of products for the benefit of others; custom assembly of materials for others; molding of synthetic products; molding of plastic; sandblasting services
Owner
Prosecution history
- 21 May 2024 — FINAL DECISION TRANSACTION PROCESSED BY IB
- 18 Apr 2024 — TEAS CHANGE OF CORRESPONDENCE RECEIVED
- 18 Apr 2024 — TEAS CHANGE OF DOMESTIC REPRESENTATIVES ADDRESS
- 18 Apr 2024 — ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED
- 18 Apr 2024 — TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED
- 10 Apr 2024 — GENERIC MADRID TRANSACTION SENT TO IB
- 09 Apr 2024 — GENERIC MADRID TRANSACTION CREATED
- 09 Apr 2024 — FINAL DISPOSITION NOTICE CREATED, TO BE SENT TO IB
- 09 Jan 2024 — NOTICE OF REGISTRATION CONFIRMATION EMAILED
- 09 Jan 2024 — REGISTERED-PRINCIPAL REGISTER
- 26 Dec 2023 — TEAS WITHDRAWAL OF ATTORNEY RECEIVED-FIRM RETAINS
- 26 Dec 2023 — TEAS CHANGE OF CORRESPONDENCE RECEIVED
- 26 Dec 2023 — ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED
- 26 Dec 2023 — TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED
- 03 Dec 2023 — EXTENSION OF TIME TO OPPOSE PROCESS - TERMINATED