NLM

Dead / Cancelled — Cancelled — Section 8 (as of 20 Jul 2002)

What this means for you

This registration has been cancelled; it no longer blocks anyone on its own. The name may be available, but check before relying on it — rights can also come from actual use, not only from the register.

Record

Serial number
73821557
Registration number
1652892
Mark type
Design + words
Filed
25 Aug 1989
Published for opposition
14 May 1991
Registered
06 Aug 1991
Attorney of record
KAUSHAL R ODEDRA

Goods and services

  • Class 007 — Machines and machine tools: HYDRAULIC CLAMPING SYSTEM COMPRISED OF BASES AND SECTIONS, NAMELY, PLATFORMS, DAMPERS, PEDESTALS, PLATES, FLATS, BLOCKS, AND PROFILES; RESTING PIECES, NAMELY, THREADED AND UNTHREADED FOOT PLAINS, PILLAR SUPPORTS, FOOTS, CLAMP SUPPORTS, SCREW JACKS, HEADS FOR SCREW JACKS, BLOCKS, AND SCREW JACK SUPPORTS; INDEXING AND LOCATING PARTS, NAMELY, INDEXING PINS, SPRING CATCHES, EJECTORS, STOPS, CENTERING PIECES, VEE BLOCKS, RETAINERS, INSERTS, PINS, AND SLEEVES; CLAMPING DEVICES, NAMELY, SLIDING CLAMPS, PIVOTING CLAMPS, THREADED CLAMPS, STRAIGHT CLAMPS, NOTCHED CLAMPS, CRANKED CLAMPS, SLOTTED CLAMPS, CLAMP COMPLETES, FORK-END CLAMPS, CENTER PIVOTED CLAMPS, HINGED CROSS CLAMPS, CROSS CLAMPS WITH TWO CUT OUTS, HINGE PINS, STAY BOLTS, SINGLE CAM OPERATING LEVERS, DOUBLE CAM OPERATING LEVERS, CAMMED CLAMPING FIXTURES, CLAMPING HOOKS, PIVOTING CLAMPS, LEVER OPERATRED JACK SCREWS AND THRUSTERS, STOPS WITH LOCKING FACILITIES, PLATING CRAMPS, CRAMPS FOR ROUGH PIECES, AND SPRINGS; TOGGLE CLAMPS, NAMELY, TOGGLE FASTENERS, SPINDLES WITH PADS, SPINDLES WITH NEOPRENE ENDPIECES FOR USE WITH END PIECES, PNEUMATIC TOGGLE FASTENERS, CONTROL LEVERS FOR TOGGLE CLAMPS, HANDLES FOR TOGGLE CLAMPS, BASES, AND LOCKING ARMS; HANDLING COMPONENTS, NAMELY, KNURLED NUTS, KNURLED LOCK NUTS, SCREWS, NUTS, PAD SCREWS WITH MOVEABLE HANDLES, THREADED SPINDLES, STAR KNOBS, STAR NUTS, FOUR-AMR NUTS, MUSHROOM KNOBS, BALL KNOBS, CONICAL KNOBS, HAND WHEELS, HANDLES, CAPSTANS, BOW HANDLES, KEY SCREWS, CASTLE NUTS, EYEBOLTS, CLUTCH HUBS, STAR KNOBS, OPERATING HANDLES, BALANCED HANDLES, SPINDLES, LEVER RODS, SPINDLE NUTS, LOCKING PLATFORMS, AND FOLDING KNOBS; HANDLING PARTS, NAMELY, STUDS, T-HEAD BOLTS, HOLDFASTS, SCREWS WITH PADS, PADS, SOCKET SCREWS, PIVOTED SCREWS, NUTS WITH FLANGED COLLARS, EXTENSIONS, NUTS WITH SPHERICAL BEARING SURFACES, DOMED CAP NUTS, WASHERS, BOLTS, CATCHES, RETAINERS, CHAINS, FORKS, AND ADJUSTABLE BALL SCREWS; DRILLING BUSHES, JIGS, DRILLING PLATES, SUPPORT PLATES, INDEXING PLATES, MOUNTING PLATES, AND GROUND PLATES ALL FOR USE IN HOLDING PARTS TO BE WORKED BY MACHINE TOOLS
  • Class 008 — Hand tools: MODULAR CLAMPING SYSTEM COMPRISED OF BASES AND SECTIONS, NAMELY, PLATFORMS, DAMPERS, PEDESTALS, PLATES, FLATS, BLOCKS, AND PROFILES; RESTING PIECES, NAMELY, THREADED AND UNTHREADED FOOT PLAINS, PILLAR SUPPORTS, FOOTS, CLAMP SUPPORTS, SCREW JACKS, HEADS FOR SCREW JACKS, BLOCKS, AND SCREW JACK SUPPORTS; INDEXING AND LOCATING PARTS, NAMELY, INDEXING PINS, SPRING CATCHES, EJECTORS, STOPS, CENTERING PIECES, VEE BLOCKS, RETAINERS, INSERTS, PINS, AND SLEEVES; CLAMPING DEVICES, NAMELY, SLIDING CLAMPS, PIVOTING CLAMPS, THREADED CLAMPS, STRAIGHT CLAMPS, NOTCHED CLAMPS, CRANKED CLAMPS, SLOTTED CLAMPS, CLAMP COMPLETES, FORK-END CLAMPS, CENTER PIVOTED CLAMPS, HINGED CROSS CLAMPS, CROSS CLAMPS WITH TWO CUT OUTS, HINGE PINS, STAY BOLTS, SINGLE CAM OPERATING LEVERS, DOUBLE CAM OPERATING LEVERS, CAMMED CLAMPING FIXTURES, CLAMPING HOOKS, PIVOTING CLAMPS, LEVER OPERATED JACK SCREWS AND THRUSTERS, STOPS WITH LOCKING FACILITIES, PLATING CRAMPS, CRAMPS FOR ROUGH PIECES, AND SPRINGS; TOGGLE CLAMPS, NAMELY, TOGGLE FASTENERS, SPINDLES WITH PADS, SPINDLES WITH NEOPRENE ENDPIECES FOR USE WITH END PIECES, PNEUMATIC TOGGLE FASTENERS, CONTROL LEVERS FOR TOGGLE CLAMPS, HANDLES FOR TOGGLE CLAMPS, BASES, AND LOCKING ARMS; HANDLING COMPONENTS, NAMELY, KNURLED NUTS, KNURLED LOCK NUTS, SCREWS, NUTS, PAD SCREWS WITH MOVEABLE HANDLES, THREADED SPINDLES, STAR KNOBS, STAR NUTS, FOUR-AMR NUTS, MUSHROOM KNOBS, BALL KNOBS, CONICAL KNOBS, HAND WHEELS, HANDLES, CAPSTANS, BOW HANDLES, KEY SCREWS, CASTLE NUTS, EYEBOLTS, CLUTCH HUBS, STAR KNOBS, OPERATING HANDLES, BALANCED HANDLES, SPINDLES, LEVER RODS, SPINDLE NUTS, LOCKING PLATFORMS, AND FOLDING KNOBS; HANDLING PARTS, NAMELY STUDS, T-HEAD BOLTS, HOLDFASTS, SCREWS WITH PADS, PADS, SOCKET SCREWS, PIVOTED SCREWS, NUTS WITH FLANGED COLLARS, EXTENSIONS, NUTS WITH SPHERICAL BEARING SURFACES, DOMED CAP NUTS, WASHERS, BOLTS, CATCHES, RETAINERS, CHAINS, FORKS, AND ADJUSTABLE BALL SCREWS; DRILLING BUSHES, JIGS, DRILLING PLATES, SUPPORT PLATES, INDEXING PLATES, MOUNTING PLATES, AND GROUND PLATES ALL FOR USE IN HOLDING PARTS TO BE WORKED BY MACHINE TOOLS; CONVENTIONAL CLAMPING SYSTEM COMPRISED OF BASES AND SECTIONS, NAMELY, PLATFORMS, DAMPERS, PEDESTALS, PLATES, FLATS, BLOCKS, AND PROFILES; RESTING PIECES, NAMELY, THREADED AND UNTHREADED FOOT PLAINS, PILLAR SUPPORTS, FOOTS, CLAMP SUPPORTS, SCREW JACKS, HEADS FOR SCREW JACKS, BLOCKS, AND SCREW JACK SUPPORTS; INDEXING AND LOCATING PARTS, NAMELY, INDEXING PINS, SPRING CATCHES, EJECTORS, STOPS, CENTERING PIECES, VEE BLOCKS, RETAINERS, INSERTS, PINS, AND SLEEVES; CLAMPING DEVICES, NAMELY, SLIDING CLAMPS, PIVOTING CLAMPS, THREADED CLAMPS, STRAIGHT CLAMPS, NOTCHED CLAMPS, CRANKED CLAMPS, SLOTTED CLAMPS, CLAMP COMPLETES, FORK-END CLAMPS, CENTER PIVOTED CLAMPS, HINGED CROSS CLAMPS, CROSS CLAMPS WITH TWO CUT OUTS, HINGE PINS, STAY BOLTS, SINGLE CAM OPERATING LEVERS, DOUBLE CAM OPERATING LEVERS, CAMMED CLAMPING FIXTURES, CLAMPING HOOKS, PIVOTING CLAMPS, LEVER OPERATED JACK SCREWS AND THRUSTERS, STOPS WITH LOCKING FACILITIES, PLATING CRAMPS, CRAMPS FOR ROUGH PIECES, AND SPRINGS; TOGGLE CLAMPS, NAMELY, TOGGLE FASTENERS, SPINDLES WITH PADS, SPINDLES WITH NEOPRENE ENDPIECES FOR USE WITH END PIECES, PNEUMATIC TOGGLE FASTENERS, CONTROL LEVERS FOR TOGGLE CLAMPS, HANDLES FOR TOGGLE CLAMPS, BASES, AND LOCKING ARMS; HANDLING COMPONENTS, NAMELY, KNURLED NUTS, KNURLED LOCK NUTS, SCREWS, NUTS, PAD SCREWS WITH MOVEABLE HANDLES, THREADED SPINDLES, STAR KNOBS, STAR NUTS, FOUR-AMR NUTS, MUSHROOM KNOBS, BALL KNOBS, CONICAL KNOBS, HAND WHEELS, HANDLES, CAPSTANS, BOW HANDLES, KEY SCREWS, CASTLE NUTS, EYEBOLTS, CLUTCH HUBS, STAR KNOBS, OPERATING HANDLES, BALANCED HANDLES, SPINDLES, LEVER RODS, SPINDLE NUTS, LOCKING PLATFORMS, AND FOLDING KNOBS; HANDLING PARTS, NAMELY, STUDS, T-HEAD BOLTS, HOLDFASTS, SCREWS WITH PADS, PADS, SOCKET SCREWS, PIVOTED SCREWS, NUTS WITH FLANGED COLLARS, EXTENSIONS, NUTS WITH SPHERICAL BEARING SURFACES, DOMED CAP NUTS, WASHERS, BOLTS, CATCHES, RETAINERS, CHAINS, FORKS, AND ADJUSTABLE BALL SCREWS; DRILLING BUSHES, JIGS, DRILLING PLATES, SUPPORT PLATES, INDEXING PLATES, MOUNTING PLATES, AND GROUND PLATES ALL FOR USE IN HOLDING PARTS TO BE WORKED BY MACHINE TOOLS

Owner

Prosecution history

  • 20 Jul 2002 — CANCELLED SEC. 8 (10-YR)/EXPIRED SECTION 9
  • 21 Aug 1997 — REGISTERED - SEC. 8 (6-YR) ACCEPTED
  • 04 Aug 1997 — REGISTERED - SEC. 8 (6-YR) FILED
  • 06 Aug 1991 — REGISTERED-PRINCIPAL REGISTER
  • 14 May 1991 — PUBLISHED FOR OPPOSITION
  • 12 Apr 1991 — NOTICE OF PUBLICATION
  • 02 Feb 1991 — APPROVED FOR PUB - PRINCIPAL REGISTER
  • 13 Dec 1990 — CORRESPONDENCE RECEIVED IN LAW OFFICE
  • 13 Jun 1990 — FINAL REFUSAL MAILED
  • 26 Apr 1990 — CORRESPONDENCE RECEIVED IN LAW OFFICE
  • 26 Oct 1989 — NON-FINAL ACTION MAILED
  • 18 Oct 1989 — ASSIGNED TO EXAMINER

View this trademark record on Marksy